Website Operator

Peter Seppele GmbH
Bahnhofstrasse 79
A - 9710 Feistritz/Drau

Tel.: 04245  6201
Fax: 04245  6336

Data Protection and Copyright
The contents of this website are protected by copyright. The information here in is intended for personal use only. Any other use of this information, particularly its storage in databases, duplication and any form of commercial utilization, as well as the passing-on of this information to third parties, as a whole or in part or in a revised or altered form, without the consent of Peter Seppele GmbH is forbidden.

Hyperlinks on www.seppele.at, www.thermofloc.com and www.thermofloc.at are welcome! Any integration of single pages of our offer in the frames of other operators is forbidden.
 
Peter Seppele GmbH has not adopted as its own any third-party contents which can be reached through links on this website, and is not responsible for the said contents. Peter Seppele GmbH expressly dissociates itself from any impermissible or ambiguous contents of third parties.

Various reports, data sheets and audit reports as PDF

• ETZ - Österreich (approx. 0.1MB)
• ETZ - Ukraine (approx. 0.4MB)
• ETZ - Frankreich (approx. 0.1MB)
• ETZ - Italien (approx. 0.4MB)
• ETZ - Rumänien (approx. 0.5MB)
• ETZ - Schweden (approx. 0.3MB)
• Avis Tecnique OG Decke (approx. 0.4MB)
• Avis Tecnique Wand (approx. 0.3MB)
• Prüfbericht Wärmeleitfähigkeit Dämmpellets (approx. 0.3MB)
• Prüfbericht Brandkennziffer Schweiz (approx. 0.1MB)
• Prüfbericht Brandschutzzulassung Schweiz (approx. 0.8MB)
• Prüfbericht IBMB Trennwandkonstruktionen (approx. 0.5MB)
• Prüfbericht IBMB Dachkonstruktionen (approx. 0.6MB)
• Prüfbericht Holzkonst. Gebäudestrennwand (approx. 0.8MB)
• Prüfbericht Holzkonst. Holzständer Wand (approx. 0.6MB)
• Gutachten gesundh. Unbedenklichkeit (approx. 0.4MB)
• DIN Sicherheitsdatenblatt (approx. 0.1MB)
• Prüfbericht Brandverhalten (approx. 0.3MB)
• Gutachten Druck/Stauchverhalten Dämmpellets (approx. 1.0MB)
• Dynamische Steifigkeit Pellets (approx. 0.7MB)
• Eigenfestigkeit (approx. 0.6MB)
• Gesundheitliche Unbedenklichkeit (approx. 1.1MB)
• Schalldämmwert (approx. 1.7MB)
• Schalldämmwerte Wohnungstrennwand (approx. 1.2MB)

Unlike the Blow-in Insulation, Thermofloc Floor Filling is processed by hand and used exclusively as a non-pressure-resistant insulation at the horizontal level (ceiling on the top storey, between joists in a wood-joist floor construction).

In order to ensure better manual processing, the insulation material is less compressed in the packaging. Thermofloc Floor Filling is available in 12 kg sacks, with 24 sacks per pallet. The insulation material is simply poured on evenly to achieve the desired insulation thickness and then spread to form a level surface. Material consumption is approx. 35 kg/m³.

Thermofloc Insulation Pellets are compressed granules made of cellulose fibre, which are used as a loose dry insulation layer and cavity filling material for insulating both floors and ceilings.
Thermofloc Insulation Pellets are building-biologically and ecologically benign, as they are manufactured from cellulose fibre without the addition of binding or preservative agents.

• Increased soundproofing: The high piled weight of 500kg/m³ provides increased soundproofing, which is particularly important in the area of intermediate ceilings.
• Produce very little Dust: Thermofloc Insulation Pellets produce very little dust and can therefore be installed as easily and unproblematically as any other loose dry insulation filling.
• Cavity filling Material: As well as being used as a cavity filling material, Thermofloc Insulation Pellets can also be installed as a supporting floor construction.
• Levelling out uneven Sections: Thermofloc Insulation Pellets are likewise excellently suited for levelling out uneven sections of ceilings and floors.

Thermofloc Roof Sheathing Rolls protect the construction from driving rain and thus prevent any penetration of moisture into the roof or wall structure. The rolls are UV stable, particularly tear-resistant and extremely open to diffusion.

Service is our success!

Here, you’ll find additional information such as downloads, texts inviting tenders, pictures, links, trade fair dates, press reports and much more...

Only good insulation can provide effective thermal insulation. Thermofloc is a semi-natural insulation material made of cellulose fibres, which is applied in roofs, ceilings and floors by means of a blow-in technique.

The advantages of insulating with Thermofloc are clear:

• Ecological Insulation: Thermofloc Blow-in Insulation is a building-biologically benign insulation which guarantees optimal indoor temperatures during both the cold and the hot seasons of the year. Ecological thermal insulation Thermofloc Blow-in Insulation is ecologically benign and recyclable.
• Organic Insulation Material: Bring an organic insulation material, Thermofloc Blow-in Insulation can absorb moisture and then release it again. Thermofloc Blow-in Insulation is therefore ideally suitable for use in roof and wall constructions which are open to diffusion.
• Free of thermal bridges: Thermofloc Blow-in Insulation provides a continuous, tailor-made insulation layer which is free of thermal bridges and, in contrast to insulation in board or mat form, does not result in any waste cuttings.
• Price/Performance Ratio: Compared to other conventional insulation materials, Thermofloc Blow-in insulation offers an excellent price/performance ratio. Thermofloc Blow-in Insulation does not cost more than conventional thermal insulation made of mineral fibre.
• Licensed Installation Companies: Thermofloc Blow-in Insulation is installed exclusively by licensed installation companies, thus guaranteeing the high durability and long service life of the insulation.

Reinforced green polyethylene adhesive tape with acrylate glue, for
air-tight sealing of areas where Thermofloc Vapour-Proof Linings are perforated or overlapping.

Universal black adhesive tape on a polyethylene basis, with carrier material reinforcement layer and release paper with perforation slits, for sealing blow-in openings.

Double-sided blue adhesive tape, used for sticking down rolls of fibrous lining and Roof Sheathing.

For more than 75 years, the family business P. Seppele GesmbH has been operating in a wide variety of fields in the service of its customers. Founded as a forwarding company in 1929, it has gradually developed and successfully mastered new business segments.

Peter Seppele Gmbh’s main fields of operation are in the areas of “Modern Waste Management”, fuels (mineral oil, wood pellets, etc.) and insulation materials (Thermofloc). The company headquarters are located in Feistritz/Drau in Carinthia. Two further company locations are Villach (recycling yard) and Sachsenburg (Pellet Works II).

• Forum Holz (www.forum-holz.de)
• Holz.de - Holzwirtschaftsportal (www.holz.de)
• Holzforschung Austria (www.holzforschung.at)
• HELMA Eigenheimbau (www.baupartner.de)
• Harrer - Spezialist für Holzbau (www.harrer.at)
• Peter Seppele GmbH (www.seppele.at)
• FIRESTIXX - Premium Pellets (www.firestixx.org)
• proPellets Austria (www.propellets.at)
• Lignatec Zimmerei GmbH (www.lignatec.de)
• 1000 Fragen? 1 Antwort (www.neugruenderweb.at)
• Wärmedämmstoffe (www.waermedaemmstoffe.com)
• Wien-konkret (www.wien-konkret.at)
  
  

Our adhesive tapes are specially adapted to our Thermofloc products and, together with the Vapour-Proof Lining and Roof Sheathing Rolls, constitute a complete thermal insulation system. The adhesive tapes are used for the air-tight sealing of Thermofloc Vapour-Proof Lining and Roof Sheathing Rolls. In addition, they can be used for sticking down joint connections onto derived timber product boards (e.g. OSB boards, plywood boards, etc.).

Thermofloc Insulation Pellets have been developed for the construction of floors and soundproofing intermediate ceilings. They are easy to apply manually as a loose dry filling material in granule form without any special training.

The Thermofloc insulation pellets can be used both as a supporting component and as a pour-in insulation to fill empty cavities. Handling is facilitated by the material’s high density (500 kg/m³) and the extremely small amount of dust it produces. Like the blow-in insulation, this product is safe from the organic architectural viewpoint, and offers an attractive price-performance ratio.