Choose the specific VECTOR-G depending on the desired insulation thickness. The side heights of 90 to 240 mm facilitate seamless insulation thicknesses of 180 to 330 mm. Fasten according to the plans in the exact stipulated spacing.

The fastening materials depend on the structural conditions and statics.
Accommodation of the wood lathe is guaranteed with the VECTOR-H. In the foundation and eaves area, the VECTOR S is mounted as a terminator. For optimum fastening of the gypsum laths, a wood lath that is at least 5 x 6 cm is recommended. Before fastening the VECTOR-H in place, the spaces can be positioned differently making it easier to compensate for unevenness.

The wood that is used must be dry and straight, and can be mounted by means of commercial wood screws.
Medium density or hard wood fibre boards are suitable for separation of the compartments. The installation must be done continuously in order to facilitate blowing out the construction.

Besides the diversity of facade materials, there are also other important influencing factors that must be taken into consideration for a safe and economical fastening system.

The VECTOR facade system can be used for solid wood structures as well as for renovation of existing walling and reinforced concrete construction.

All surfaces like plaster facades, open wood facades and facades made of board materials are possible.